{
  "NcWpName": "1",
  "ProjectData": {
    "PDTotalTime": "00:25:00",
    "PDCutTime": "00:18:30",
    "TotalTime": "00:25:00",
    "CutTime": "00:18:30",
    "PDSession": "D:\\Demo\\Projects\\DEMO_MOULD",
    "NcprogramPath": "D:\\Demo\\Projects\\DEMO_MOULD\\nc",
    "Project": "DEMO_MOULD"
  },
  "ThicknessF": 0.0,
  "ThicknessM": 0.1,
  "ThicknessR": 0.5,
  "NumberF": 1,
  "NumberM": 0,
  "NumberR": 0,
  "AutoToolChangNcF": "",
  "AutoToolChangNcM": "",
  "AutoToolChangNcR": "",
  "DetectionSize": "",
  "ReferencePlaneZval": 0.0,
  "CreatTime": "2026-09-18 17:00:00",
  "PieceNumber": "DEMO-WP-001",
  "PositionDataList": [
    {
      "ToolPathList": [
        {
          "NcWpName": "1",
          "Ncprogram": "DEMO_R1",
          "Toolpath": "rough_1",
          "ToolID": "D10R0",
          "ToolType": "end_mill",
          "Dia": 10.0,
          "Tip": 0.0,
          "Overhang": 35.0,
          "TPZMin": -12.5,
          "Spindle": 8000.0,
          "Cut": 2000.0,
          "Tol": 0.05,
          "Totaltime": "00:10:00",
          "CutTime": "00:08:00",
          "Thickness": 0.5,
          "AxialThickness": 0.0,
          "CollChecked": true,
          "ToolNumber": "1",
          "Description": "开粗",
          "Len": 20.0,
          "TaperDiameter": 0.0,
          "TaperAngle": 0.0,
          "Stepover": 5.0,
          "Stepdown": 1.0,
          "NcprogramNotes": "",
          "ToolDescription": "D10 平底刀",
          "FeedRateRapid": 5000.0,
          "WKPLName": "1",
          "HolderName": "",
          "Tool": "D10R0",
          "ToolNote": "",
          "Depth": 12.5,
          "ToolpathNotes": "",
          "NcprogramPath": "D:\\Demo\\Projects\\DEMO_MOULD\\nc\\DEMO_R1.nc",
          "SafeZ": 50.0,
          "NcWorkplane": "1",
          "NcFileSize": "12KB",
          "Strategy": "",
          "TPXmax": 50.0,
          "TPXmin": -50.0,
          "TPYmax": 40.0,
          "TPYmin": -40.0,
          "TPZmax": 0.0,
          "TPZmin": -12.5
        },
        {
          "NcWpName": "1",
          "Ncprogram": "DEMO_F1",
          "Toolpath": "finish_1",
          "ToolID": "D6R0",
          "ToolType": "end_mill",
          "Dia": 6.0,
          "Tip": 0.0,
          "Overhang": 30.0,
          "TPZMin": -12.5,
          "Spindle": 12000.0,
          "Cut": 1500.0,
          "Tol": 0.01,
          "Totaltime": "00:15:00",
          "CutTime": "00:10:30",
          "Thickness": 0.0,
          "AxialThickness": 0.0,
          "CollChecked": true,
          "ToolNumber": "2",
          "Description": "精铣",
          "Len": 15.0,
          "TaperDiameter": 0.0,
          "TaperAngle": 0.0,
          "Stepover": 0.3,
          "Stepdown": 0.2,
          "NcprogramNotes": "",
          "ToolDescription": "D6 平底刀",
          "FeedRateRapid": 5000.0,
          "WKPLName": "1",
          "HolderName": "",
          "Tool": "D6R0",
          "ToolNote": "",
          "Depth": 12.5,
          "ToolpathNotes": "",
          "NcprogramPath": "D:\\Demo\\Projects\\DEMO_MOULD\\nc\\DEMO_F1.nc",
          "SafeZ": 50.0,
          "NcWorkplane": "1",
          "NcFileSize": "48KB",
          "Strategy": "",
          "TPXmax": 50.0,
          "TPXmin": -50.0,
          "TPYmax": 40.0,
          "TPYmin": -40.0,
          "TPZmax": 0.0,
          "TPZmin": -12.5
        }
      ],
      "StartBlockMaxZ": 5.0,
      "PositionName": "工位1",
      "ModelSizeByPosition": {
        "Xmin": -50.0,
        "Xmax": 50.0,
        "Ymin": -40.0,
        "Ymax": 40.0,
        "Zmin": -12.5,
        "Zmax": 0.0
      },
      "BlockSizeByPosition": {
        "Xmin": -55.0,
        "Xmax": 55.0,
        "Ymin": -45.0,
        "Ymax": 45.0,
        "Zmin": -15.0,
        "Zmax": 5.0
      },
      "BlockSizeString": "110*90*20",
      "PositionTotalTime": "00:25:00",
      "PositionCutTime": "00:18:30",
      "ImageBytesList": [],
      "DatumMark": 1
    }
  ],
  "CellBarCodeF": "",
  "CellBarCodeM": "",
  "CellBarCodeR": "",
  "ZType": "",
  "NcRotate": false,
  "NcAngle": 0.0,
  "NcMirror": false,
  "NcAxis": 0
}